Digit map is a set of rules to determine when the user has finished dialing. With digit map, users don’t have to press ‘#’ key or “call”key after dialing. Digit map comes from MGCP protocol. In MGCP, Call Agent will send a digit map to endpoint, so “use digit map”is always selected and users don’t have to store a digit map file in the endpoint beforehand. With other protocols, a digit map file has to be stored in the phone beforehand and can be upgraded by pressing the [update digitmap] button or click the [upgrade firmware] at the bottom of the settings web page. Here is a brief description of some items that you can have in your digimap X represents any number between 0 and 9. T represents a period of time after the user pressed the last number. Default value is 5 seconds. [0-5]: Any number between 0 and 5. That is 0, 1, 2, 3, 4, 5. 13xxxxxxxxx: Any 11 digits number starting with 13. 02[0-57-9]xxxxxxxx: Any number starting with 02, the second number between 0 and 5, the third number is between 7 and 9, and total length is 12. *x.T:Starting with * key, and users have waited T seconds after pressing the last digits. x.T: Any digit number and users have waited T seconds after pressing the last digits. If the number dialed matches some item in the digit map file, or it doesn’t match with any item, this number will be sent out immediately. Not like “use dial plan”, “use digit map”won’t change the number dialed, the number sent is the same as the number dialed. “use digit map”can be combined with “use dial plan”and “inner line”. First using digit map to determine when the user finished dialing, then convert this number to the number actually sent according to “use dial plan”and “inner line”. after you have done this then telent to the phone using somthing like putty Put in your config password for the phone then type set digitmap 1 then type write The phone will then reboot and the digit map will be active HPA168V V1.43.021 settings Password:******** P:\>set digitmap 1 P:\>write rebooting… digitmap_file.txt
