If you have upgraded from freepbx 2.4 to freepbx 2.5 and now have problems with your inbound routing not working then read on.
If you have callerid inbound routing for some of your calls you may have found that it has stopped working since upgrading to freepbx 2.5.
After some testing this is because the any/any catch all is doing what it should and catching all of the calls. This is no good if you have other inbound routes setup as these will no longer work.
The fix for me was to add the following in the any/any route
in the DID add _.
yep thats it _. and then save
You should now find that all of your inbound call routes work again
